Saltar al contenido

Industry

Specialty oils

Special application oils

Having a wide range of specialized products is very useful for any industry, and in particular when it comes to metalworking. This is why, at Repsol, a number of lubricant oils have been designed to meet most of the metalworking industry's needs in any given transformation process.
  • CONTINUOUS CASTING

EMPATEM CC-30 GS

A natural paraffin mineral oil with medium viscosity, formulated with highly refined base oils and specially selected additives. These provide the properties required to operate in the difficult conditions needed for hot, rapid steel quenching; where the bath temperature is between 85 and 125°C (185 and 257°F), and in an enclosed atmosphere above 95° C (203°F). This kind of lubricant is used with carbon or low alloy steel.

EMPATEM CC-30 G

A natural paraffin mineral oil with high viscosity, formulated with highly refined selected base oils and special additives, which provide the properties required to operate in the difficult conditions needed for hot, rapid steel quenching. This product is particularly suitable for use in hot, rapid quenching, where the bath temperature is between 150 and 180°C (302 and 356°F) and even higher if there is an enclosed atmosphere. This kind of lubricant is used with carbon or low alloy steel.

EMPATEM CC-30 H

This is a natural paraffin mineral oil with low viscosity, formulated with highly refined base oils, which provide the properties required to operate in the difficult conditions needed for the normal quenching of steel when rapid quenching is not needed. This kind of oil is used with steel alloys and is formulated to last a long time.

EMPATEM CC-50 GS

Continued casting oil with synthetic technology that improves the surface finish of ingots in facilities that work with carbon or low-alloy steels at temperatures of over 120°C in the bath. This oil has an intermediate viscosity, which guarantees the correct lubrication of the ingot mold and minimizes the residue produced when it burns.
  • CUTTING

Ibercut 12 AM

If you’re looking for a pure cutting oil, then IBERCUT 12 AM is just the thing you're looking for: a pure lubricant with paraffin base oils and additives that are suitable for steel honing. One of its requirements its that it needs deposits to be cleaned prior to being introduced. After doing so, you’ll prevent “oil mist”, chip soldering, and seizing up, providing protection and extending lifespan.

Ibercut 30 A

The pure cutting oil IBERCUT 30 A is formulated using highly refined natural paraffin mineral base oils that make it a great lubricant, with the film resistance needed in medium-to-high difficulty operations, thus avoiding chip soldering and the seizing up of tools. It is particularly recommended for thread work, rigging, etc. of medium-hard stainless steel, but never for soft, yellow metals.

Ibercut 20 A

For jobs with high-density steel, and, more specifically, threading, bolting, and broaching of stainless steel, at Repsol, we have the pure cutting oil IBERCUT 20 A. Its paraffin base oils provide it with a high flash point to prevent risks, smoke formation, and chip soldering.

Ibercut 20 C

IBERCUT 20 C is a pure cutting oil formulated with refined paraffin base oils and a number of additives. It is intended for general machine operations involving steel and alloys that require effective cooling while maintaining a good finish, as its transparency and allows the machinery to be seen. Its cooling qualities extend the lifespan of tools, its low flash point prevents fires, and it does not stain aluminum or copper components.

Ibercut EDM

The lubricant IBERCUT EDM is formulated for cooling, lubricating, and separating the micro-chips that appear in spark erosion work. It is a very light fluid with a high refining level, odorless, glossy, and transparent. This product is suitable for steel honing, due to its low volatility, flammability, and toxicity.

Metal 200

The lubricant METAL 200 is a light fluid used to polish ferritic and austenitic stainless steels with low carbon content due to its low viscosity and flash point, their excellent resistance to aging, oxidation, and corrosion. In addition, degreasing this lubricant is easy.

Metal 300

The lubricant METAL 300 is made with hydrogenated base oils used to polish ferritic and austenitic stainless steels with low carbon content due to its low viscosity and flash point, their excellent resistance to aging, oxidation, and corrosion. In addition, degreasing this lubricant is easy.
  • DEMOLDING AGENTS

DESMOLDOIL A

DESMOLDOIL A is an ideal lubricant for a wide range of uses requiring water-based demolding.

DESMOLDOIL

The range of DESMOLDOIL products has been carefully analysed to guarantee compliance with our customers' demands in relation to all kinds of applications and finishes (pieces of concrete, formwork, etc.) on any kind of surface, such as wood, iron, etc.

DESMOLDOIL R

In Repsol’s mold-release lubricant range, DESMOLDOIL R's base is regenerated, contributing to the recycling of these products. It is also formulated to demold concrete elements on any type of surface thanks to its demolding properties, its environmental friendliness, its resistance to oxidation, and its excellent finishing.

DESMOLDOIL PU

DESMOLDOIL PU is a one of the most versatile lubricants in this range, as it can be used for a range of demolding applications. Its demolding properties include its environmental friendliness, its resistance to oxidation, and its excellent finishing.
  • SLIDEWAYS

Zeus Guía

Specially formulated for lubricating machine-tool slideways. Its excellent adherence, anti-wear, extreme pressure, and antistick-slip properties facilitate movements and displacements without jumps.
  • PNEUMATIC TOOLS

Astra

HERRAMIENTAS NEUMÁTICAS
If you are looking for extreme pressure lubricants especially suitable for drills, hammers, and pneumatic tools, then the lubricant ASTRA is just what you need. This is a mineral oil treated with solvents to enhance its properties, which include excellent oxidation resistance, anti-corrosion, and anti-rust, as well as reducing deposits.
  • ROLLING

Laminox 1197

The lubricant LAMINOX 1197 is used primarily for cold rolling of ferritic and austenitic stainless steels with low carbon content. This is a very light lubricant due its refining process and is known for its low viscosity, perfect lubrication in rollers, ease of degreasing, and for lowering the risk of stains.

Laminox G 3000

At Repsol, we have developed LAMINOX G 3000 for cold rolling that requires an enhanced lubricant with high load capacity, is resistant to oxidation, prevents deposit formation, and filters easily. It is a very light and highly-refined lubricant with additives specialized in stainless steel.

Laminox G 50

The lubricant LAMINOX G 50 is a very light fluid used primarily for cold rolling of ferritic and austenitic stainless steels with low carbon content. Unlike the other lubricants in the LAMINOX range, it is formulated to reduce viscosity as much as possible.

Trefi 20

TREFI 20 is a hydraulic lubricant for deforming, stretching, and wiredrawing ferrous and non-ferrous stainless steels. This lubricant is made with highly refined, carefully selected paraffin base oils to considerably improve its properties, such as its outstanding greasiness and its lubricity which reduce wear and protects tools.
  • STEAM ENGINES

Helen

MÁQUINAS DE VAPOR
The lubricant HELEN is produced with a mix of paraffin and synthetic base oils, designed to lubricate cylinders in steam machinery. It is recommended for this use due to its greasiness, its high flash point, its minimal losses from volatility, and low amount of soot residue.
  • PROCESSES

Pro

Highly-refined paraffin-based lubricants with high oxidation resistance when used at high temperatures.
  • PREVENTIVE

Antix F

A clear, water-resistant oil providing temporary protection against corrosion. Formulated using a natural paraffin base and additives to improve corrosion stability. Antix-F is particularly suitable for inhibiting corrosion in the machining stages of delicate parts. As it is a very light oil, it can be applied using immersion, a brush, or a spray gun. It is also suitable for protecting parts and tools that are kept in storage for extended periods of time.
  • QUENCHING

Ibertem 34

A natural paraffin mineral oil with medium viscosity, formulated with highly refined base oils and specially selected additives. These provide the properties required to operate in the difficult conditions needed for hot, rapid steel quenching; where the bath temperature is between 85 and 125°C (185 and 257°F), and in an enclosed atmosphere above 95° C (203°F). This kind of lubricant is used with carbon or low alloy steel.

Ibertem 99-F

A natural paraffin mineral oil with high viscosity, formulated with highly refined selected base oils and special additives, which provide the properties required to operate in the difficult conditions needed for hot, rapid steel quenching. This product is particularly suitable for use in hot, rapid quenching, where the bath temperature is between 150 and 180°C (302 and 356°F) and even higher if there is an enclosed atmosphere. This kind of lubricant is used with carbon or low alloy steel.

Ibertem 15-R

This is a paraffin mineral oil with low viscosity, formulated with highly refined base oils, which provide the properties required to operate in the difficult conditions needed for the normal quenching of steel when rapid quenching is not needed. This kind of oil is used with steel alloys and is formulated to last a long time.

Ibertem 15

A paraffin mineral oil with low viscosity, formulated with refined base oils and specially selected additives which provide the properties required to overcome the difficult conditions needed for the normal quenching of steel. This product has been designed for normal, cold quenching work; where the bath temperature is between 40 and 80°C (104 and 176°F). This kind of oil is used with steel alloys and is formulated to last a long time. This kind of oil is used with steel alloys and is formulated to last a long time.

Ibertem 24

Natural paraffin mineral oil with low viscosity, formulated with highly refined based oils and selected additives that increase the hardening speed and provide the properties required to overcome the difficult conditions needed in cold, high-speed steel hardening (bath temperature is between 40 and 80ºC).
  • TEXTILE INDUSTRY

TEXTIL 22

Envase de Bidón Lubricantes Repsol
A product designed to be used exclusively for spindles in knitting machines. It has high chemical stability and excellent antioxidant capabilities and also features special anti-drip characteristics that prevent the lubricant from splashing and dripping.

Related content:

Commercial network

Service station search engine

Technical support

Innovation and technology