Repsol YPF
Ruta
To get the most out of your gas cylinder, learn to use it correctly
Remove the seal by pulling the tab
Keep the seal on the spare bottle as it helps to protect the valve from dirt.
Connecting the regulator to the cylinder
Use both hands to lift up the black bakelite ring on the regulator.
Place the regulator on top of the valve and press down on the ring. Ensure that you hear a click, indicating that it has been properly connected. Pull the body of the regulator upwards to make sure.
To turn on the gas flow, flip the switch on top of the regulator so that the flame symbol on the underside is visible.
Be prepared to light your gas system before actually turning it on.
To turn off the gas flow, flip the regulator switch back to its original position.
Disconnecting the regulator
Use both hands to lift the black ring and separate it from the cylinder.
When the cylinder is not connected to the installation, protect it from dirt and rain.
